WE

HI-PE Multi Zone 金屬探測門

Complete Security Detection
Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
Very High Speed of Detection
High Immunity to External Interferences
Direct Selection of the International Security Standards
High Reliability
Local or Remote Programming with Networking Capabilities

The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.

A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.

HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.

The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.

The HI-PE Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

Main features
Immediate selection of International Security Standards. Detection of magnetic, non-magnetic and mixed alloys metal weapons. High detection speed: up to 15 m/s (45 ft/s). Very high immunity to both electrical and mechanical interference. Programmable operation controlled by microprocessor. Programming: via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), PC or computer network. Programming access protected by a mechanical lock and two alphanumeric passwords. Cable-free automatic synchronisation between two or more Metal Detectors at a minimum distance of 5 cm (2 inches) from each other. High-integration professional electronics and maximum reliability. Control unit incorporated into the detector. No need for initial or periodic calibration. Easy maintenance: modular control unit for a rapid replacement. Colour: light grey RAL 7040.
Installation Data
Power Supply: 115 / 230 VAC, ±15%, 45-65 Hz, 30 VA MAX. External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computeror an external modem. Operating temperature: from -20°C to +70°C. Relative humidity: from 0 to 95% (without condensation).
Certification and Conformity
Harmless to wearers of pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Conforms to the current International Security Standards for Walk-Through Metal Detectors. Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC).
Alarms
Visible Signals Multi-zone display bar for “height on person” localisation. High intensity display. Green and red metering signals proportional to the mass of the object detected. High acoustic intensity alarm signal. Volume and tone of alarm signal can be programmed.