: BENDING RADIUS ¡Ù 4DR



CNC80S2-0
Suitable Industries:
Especially for the production of "Thick Wall" Pipes such as Boiler, Heavy Transportation, Shipbuilding, Chemical Engineering, Power Plant, Diesel Engine.




CNC65S2-0
Suitable Industries:
Bumper, Exhaust Pipes, Exercise Equipment, Tubular Furniture, Transportation.


CNC38S2-0

Suitable Industries:
Exhaust Pipes, Car Frame, Car Seat, Handle Bar, Exerecise Equipment, Tubular Furniture, Architecture, Aircraft.





CNC
-50S2-0-4axis
Suitable Industries:
Bumper, Exhaust Pipes, Exercise Equipment, Tubular Furniture, Transportation.






OPTIONAL: 3D SIMULATION OF WORKPIECE

  • Displaying three dimensional graphic of bent pieces.
  • Inputting auto CAD directly.
  • Calculating the spring back parameter and elements.
  • Entering ISO and x.y.z method.
  • Converting data to Y.B.C.
  • IBM compatible industrial computer.
  • Micro processor-Intel Pentium¢» with 866 cpu.
  • 128 MB RAM.
  • 1.44MB 3-1/2" soft drive.
  • OPT touch screen 12.1" monitor.
  • List function of working piece.
  • Individual bending data and sequence can be stored separately.
  • A CD ROM back up copy of pre-installed program is included for each machine.

FEATURES:

  • Industrial touch screen LCD moniter.
  • 20 giga byte hard drive for developed part storage.
  • Fully selestable operational modes in Manual, semi-automatic and full automatic cycles.
  • Programmable in up to 10 different speeds independently for each axis.
  • An automatic parts counter is installed to assist with production control.
  • Two step mandrel retraction to produce excellent products.
  • YBC data entry automatically calculates the actual required tube length and enters it into the part program.
  • Computer modem dial up link with factory service center for software upgrades and operational assistance.
  • Step operation in the manual mode allows the set up people to read error messages and make part data or procedural changes in the program reducing set up scrap and preventing machine/part interference.
  • Multiples emergency safety drive are places to prevent operator injury and machine damage.
  • Hydraulic oil is continuously filtered and cooled during machine operation.
  • An oil filter alarm light reminds the operator to change or clean the hydraulic oil filter.
  • Part data is stored in hard memory and not lost during machine down time or power failure.
  • The system computer automatically examines input part data before beginning the bending cycle.
  • Operator can set up the pip feding/stop position and protection device for easier control and operation.
  • A bend arm over ride switch can be set to prevent bend arm /machine collision when bending larfer radii.
  • Programmable hitch feeding allows for bending of extremely long parts when no mandrel is used.
  • Programmable pressure die forward motion and return during the bending cycle allows are of shorter pressure die when bending larger radii.
  • Individual or simultaneous machine motion is programmable for any bend or for the complete part as needed.
  • System error messages are pinpointed on the monitor minimizing repair or correction down time.
  • Up to fore radius bending is available with automatic radius changes programmable with the part.
  • The system computer continually performs data diagnostic checks to detect errors in part data input.
  • User friendly on screen icons are easy selected by touch limiting potential errors.
  • Separate master control stand pedestal for maximum part clearance and ease of operation.
  • Autotmatic mandrel lubrication system.
  • Messages on the monitor can be displayed in Chinese/English or other languages.



¡@

SPECIFICATION:
MODEL NO.
SPECIFICATION
16S1 16S2
16S3
25S1 25S2
25S3
38S1 38S2
38S3
Max. Pipe Diameter (MAX. O. D) (mm) Ø16 Ø16 Ø25 Ø25 Ø38 Ø38
Max. Wall Thickness (mm) 1.2 1.2 1.5 1.5 2.0 2.0
Range of Center Line Radius (Extensible on Request) CLR (mm) 70 70 100 100 180 180
Max. Bending Radius Difference (R) S1-S2-S3 (mm)   35   40   50
Max. Bending Angle 190 190 190 190 190 190
Max. Effective Distance of Mandrel ¡öE¡÷ ( Extensible on Request) (mm) 1400 1400 1600 1600 2000 2000
Operation Speed Feeding Speed (Y) (mm/sec) 1200 1200 1200 1200 1000 1000
Rotating Speed (B) (¢X/sec) 300 300 280 280 210 210
Bending Speed (C) (¢X/sec) 250 250 180 180 100 100
Feeding (m/m) ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1
Working Accuracy Rotating (¢X) ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1
Bending (¢X) ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1
Hydraulic Pump (kw) 3.75 3.75 3.75 3.75 5.6 5.6
Total Motor power (kw) 6.5 6.5 9.2 9.2 17 17
max. Hydraulic Pressure (kg/cm2) 100 100 100 100 140 140
Oil Tank Capacity (L) 100 100 100 100 150 150
Cooler (L/min) 100 100 100 100 100 100
Weight of Machine (kgs) 1300 1400 1400 1500 1600 1700
 
MODEL NO.
SPECIFICATION
50S1 50S2
50S3
65S1 65S2
65S3
80S1 80S2
80S3
100S1 100S2 130S1 130S2
Max. Pipe Diameter (MAX. O. D) (mm) Ø50 Ø50 Ø65 Ø65 Ø80 Ø80 Ø102 Ø102 Ø140 Ø140
Max. Wall Thickness (mm) 2.5 2.5 3.0 3.0 3.0 3.0 4.0 4.0 5.0 5.0
Range of Center Line Radius (Extensible on Request) CLR (mm) 220 220 250 250 250 250 300 300 400 400
Max. Bending Radius Difference (R) S1-S2-S3 (mm)   80   80   90   100   150
Max. Bending Angle 190 190 190 190 190 190 190 190 190 190
Max. Effective Distance of Mandrel ¡öE¡÷ ( Extensible on Request) (mm) 2500 2500 2500 2500 2800 2800 3600 3600 4500 4500
Operation Speed Feeding Speed (Y) (mm/sec) 1000 1000 800 800 800 800 600 600 600 600
Rotating Speed (B) (¢X/sec) 180 180 160 160 160 160 100 100 60 60
Bending Speed (C) (¢X/sec) 85 85 80 80 70 70 35 35 25 25
Feeding (m/m) ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1
Working Accuracy Rotating (¢X) ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1
Bending (¢X) ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1 ¡Ó0.1
Hydraulic Pump (kw) 11 11 11 11 11 11 15 15 22 22
Total Motor power (kw) 27 27 27 27 28 28 30 30 32 32
max. Hydraulic Pressure (kg/cm2) 180 180 180 180 180 180 180 180 180 180
Oil Tank Capacity (L) 200 200 250 250 300 300 400 400 400 400
Cooler (L/min) 160 160 200 200 200 200 200 200 200 200
Weight of Machine (kgs) 2500 2800 2600 3000 3500 3850 6800 7300 8600 9200
The above specifications are in accordance with the " right-hand " ( clockwise ) bending, as standard, the " left-hand " ( counterclockwise ) bending is available on request.
The above specifications are subject to change without previous notice due to the continuous improvement on design.
MODEL NO.
SPECIFICATION
16S1 16S2
16S3
25S1 25S2
25S3
38S1 38S2
38S3
(A) Machine Length (mm) 2600 2600 2800 2800 3500 3500
(B) machine Width (mm) 1000 1000 1000 1100 1100 1200
(C) Machine Height (mm) 1250 1250 1250 1350 1300 1400
(D) Working Height (mm) 1100 1100 1100 1100 1150 1150
 
MODEL NO.
SPECIFICATION
50S1 50S2
50S3
35S1 65S2
65S3
80S1 80S2
80S3
100S1 100S2 130S1 130S2
(A) Machine Length (mm) 4800 4800 4800 4800 5300 5300 6000 6000 7000 7000
(B) machine Width (mm) 1250 1400 1350 1500 1400 1600 1900 2250 2100 2600
(C) Machine Height (mm) 1500 1600 1500 1600 1400 1600 1650 2050 1800 2250
(D) Working Height (mm) 1150 1150 1100 1100 1000 1000 1150 1150 1200 1200

¡@

Weizhou International Co., Ltd

P. O. Box 1394 kaohsiung City. Taiwan ROC

Tel : 886-7-7169249

fax : 886-7-7169250

e-mail : industry-machine@weizhou.com.tw

e-mail : general@weitronic.com.tw

http://www.weizhou.com.tw/Indmachine/Index.htm

Back-industry machine        Back-Homepage