垃圾車
An ecological solution
for city centers
|
|
TOUGH EQUIPMENT FOR A
TOUGH JOB |
Discharge
|
Professionals avoid : l
underloading of the front axle. l
Running the vehicle at under Capacity. l
overloading the rear axles. l
high running costs. |
Main
features : l
right direction of the compression forces. l
minimum friction, less wear and therefore
less downtime. l
high compression rate l
suitable for all types of refuse l
safe to operate in all circumstances. |
|
The
tried and test Ken-Ding MD series has proved to be one of the most
successful refuse collection units available over the last few years. Designed and developed with considerable assistance from the waste industry, the MD series offers a wide range of body sizes, ranging from narrow to standard widths. The body and tailgate are manufactured from quality high tensile steel achieving high legal payloads. |
|
|
||
STANDARD
FEATURES : l
Manufactured
in quality tensile steel. l
Wide,
unobstructed hopper with Hardox steel floor. l
Continuously
welded body sides-no Rust traps. l
Fully
automatic cycle. l
Manual
over-ride control. l
Hinged
tailgate canopy for easy Maintenance. l
Waterproof
tailgate with body seal. l
Automatic
tailgate locks. l
Built
in hopper props. l
Pressure
controlled ejection plate. l
Replaceable
slipper blocks. l
Comprehensive
safety features. l
Low
Rave Hight. |
Body sizes suitable for chassis from 6 tones to 24 tones. All models can be equipped with arrange of binlifts. All
equipment fully complied with latest requirements. |
|
l
Especially
designed for an efficient collection in narrow streets and hardly Places. l
To be mounted on light range chassis From
8,000 kg up to 24,000 kg. l
Low fuel consumption. l
Low noise operating system. l
Low maintenance by use of the latest Technology
and new materials. l
One complete cycle : 15 sec. At 1050 rpm l
Waterproof loading hopper and loading space. l
Low hight of loading rave 700-980 mm. l
Extreme short turning curcle by means of a short overhand. Capacity
: 6 cub.M up to 19 Cub.M |
|
Operating controls : The packing system, electrically controlled by pushbuttons, is locate on the side of the tailgate. The
ejection shield and the lifting/lowering of the tailgate are controlled by
buttons locate on the body behind the cab. Hydraulic
system : Working
pressure : 180-220 Bar Counter
pressure on ejection shield : 160-210 Bar Hydraulic rams : All
rams with hardened and chrome plated rods. Blade
: two double acting rams Carrier
: two double acting rams Door
lift : two single
acting rams Ejector
: one telescopic ram Hydraulic
Pump : Gear type Oil
Tank, Oil filters Materials
specifications : Container
construction : tensile strength 520N/mm Rear
container : tensile strength wearing plate Hopper
bottom plate : tensile strength wearing plate. |
|
|
|||
|
|
||
A
- BODY LENGTH
( mm ) |
B
- TAILGATE LENGTH
( mm ) |
C
- HEIGHT ABOVE CHASSIS (
mm ) |
D
- OVERALL BODY WIDTH
( mm ) |
E
- WIDTH INSIDE HOPPER
( mm ) |
GROSS VOLUME
(m3) |
NET VOLUME
(m3) |
TOTAL EQUIPMENT WEIGHT (kg) |
OTHER BODY SIZES AVAILABLE ON REQUEST
BIN
LIFTING DEVICE ( Optional Equipments ) :
This
universal bin lift system can handle all standard containers whilst still
retaining a low rave height to ease the loading of sack and bulk refuse.
Lifted with cam120l,
240l, 360l |
Lifted with arms 100l, 770l |
Lifted with cam 600l, 660l, 770l, 1100l |
BIN
LIFTING DEVICE, SKIPJACK ( Optional Equipments ) :
|
|
|
|
A
demonstration is all that is needed to convince you, so be sure to contact our
sales Department soon.
Model |
MD06 |
MD08 |
MD09 |
MD10 |
MD12 |
|||||
Total length +-5% |
6300mm |
6480mm |
6830mm |
7500mm |
8000mm |
|||||
Total height +-5% |
2500mm |
2800mm |
||||||||
Body box length |
3000mm |
3250mm |
3300mm |
3800mm |
4100mm |
|||||
Body width |
2200mm |
2130~2200mm |
2200mm |
2200mm |
2400mm |
|||||
Body height |
1520mm |
1820mm |
||||||||
Body capacity |
6.m3 |
8.m3 |
9.m3 |
10.m3 |
12.m3 |
|||||
Rear hopper capacity |
0.7
or 1.m3 |
1.m3 |
||||||||
Total capacity |
6.7~7.m3 |
8.7~9.m3 |
10.m3 |
11.m3 |
13.m3 |
|||||
Entrance width |
1520
or 1700mm |
1700mm |
||||||||
Entrance clearance |
About
900mm |
|||||||||
Slurry box capacity |
100
L |
120L |
120L |
120L |
150L |
|||||
Pressure (max) |
2500~3000 |
|||||||||
Normal pressure |
1800~2000 |
|||||||||
Operation type |
Manual
or Automatic, single action or continue ( Optional ) |
|||||||||
Rear hopper lock devices |
Hydraulic
Automatic lock |
|||||||||
We
reserve the right to change specification without prior notice.
台灣高雄市前鎮區武德街135巷24號
Tel
: 886-7-7169249 Fax :
886-7-7169250
e-Mail : shiu@ksts.seed.net.tw
e-Mail : eng-machine@weizhou.com.tw
e-Mail : weizhou@ms65.hinet.net
http://www.weizhou.com.tw/Engmachine/e-refuse/index-export.htm