Pivot Gun Control Valve
Winner of AE50 2001 Outstanding Innovations The Pivot Gun Control Valve consists of a Big Gun® Sprinkler + an 800 Series valve (A2 B7 C3). No solenoid is needed for this gun-control system (when a booster pump is used).
• The proven Big Gun® reliability.
• Steady drive reduces end gun vibration.
• Long life bearings.
• Maximum throw performance.
• No adjustment needed.
• Easy to use bolt-on connection.
• Smooth operation.
• Efficient low-pressure loss.
• Minimal control water = minimized filtration.
• Fail safe normally-closed valve.
• Automatic drain to avoid freeze damage.
• Principle of Operation: The 2" valve is normally closed. When
the booster pump
is turned on, the added pressure* causes the valve to open operating the gun.
No other accessory is needed. The small amount of water in the sleeve chamber
(about 1/2 cup) is forced back into the system. When the booster pump is turned
off then the system pressure re-closes the valve.
• Booster pump added pressure must be 18 PSI or more. Must provide a way
to
vent air out of booster pump.
瑋洲企業有限公司
高雄市前鎮區武德街135巷24號 信件請寄: 高雄市郵政信箱1394號
Tel : ( 07 ) 7169249 Fax : (07) 2134620
e-Mail : agri-machine@weizhou.com.tw
e-Mail : shiu@ksts.seed.net.tw
Http://www.weizhou.com.tw/Agrimachine/index-htm