SRNV100 Nozzle Valve
Automating the operation of the end gun on a center pivot system has never been easier. The end gun control valve is designed to attach to the base of the gun. In situations where a booster pump is used, the valve will even operate without the problems of solenoid because one is not needed.
• A more reliable, more economical, more energy efficient way to
control your pivot end gun.
• A simple mechanical valve which can be either hydraulically or
electrically controlled and linked to the pivot control system.
• Externally mounted so water does not have to pass through the valve
before reaching the gun eliminating the friction loss and turbulence which
conventional control valves can.
• No problem with debris hanging up in the valve.
• No winterizing problems because when pressure at the gun drops to
approximately 8 PSI the Nelson Valve automatically opens allowing the gun to
drain.
瑋洲企業有限公司
高雄市前鎮區武德街135巷24號 信件請寄: 高雄市郵政信箱1394號
Tel : ( 07 ) 7169249 Fax : (07) 2134620
e-Mail : agri-machine@weizhou.com.tw
e-Mail : shiu@ksts.seed.net.tw
Http://www.weizhou.com.tw/Agrimachine/index-htm