一前&二後牧草割草機
GXT 12005 SM
Large working width - small investment With a capacity of 20 ha per hour, this trailed triple set is suitable for the largest farms and contractors. In spite of the large working width with 32 discs, the power requirement is only approx. 147 kW/ 200 HP. |
|
The first trailed triple combination
The triple set is based on a semi-mounted trailed transport wagon with 2 cutting units and the GXF front mower with Contour Float. The patented transport wagon is equipped with power steering which ensures optimal manoeuvrability. - This is a great advantage in connection with narrow roads, field corners and headland turns.
|
|
A cost effective investment
Naturally, a GXT 12005 triple combination is a considerably smaller
investment than a self-propelled unit. The largest investment, i.e. the
tractor, will not be bound to this one task – instead it can be used for
other purposes outside the grass season. Therefore, GXT 12005 is a very
cost effective investment with a high capacity!
|
|
High capacity - and safety! The Anti Crash system Top Safe, stone protection in the form of a
pressure relief valve on the swivel cylinders and a friction clutch on the
PTO drive shafts are features that make it possible to work at a speed of
up to 20 km/h. With this effective safety system you obtain not only high
capacity but also long life.
|
|
Lateral adjustment
If working on hilly ground GXT 12005 can be equipped with hydraulic
equipment making it possible to steer the transport wagon laterally up to
40 cm. Thereby the machine works to the fullest possible width – also
when driving across hillsides.
|
|
Individual control of cutting units
With this large working width it may in some situations be desirable to
work with only one cutting unit, e.g. for short work mowing and when
finishing a field. For this purpose GXT 12005 can be supplied with
individual control of the cutting units. Thereby
you avoid driving in already mown material.
|
|
Low stubble height
With JF-STOLL's unique on both the front and the rear mounted machines,
it is possible to obtain stubble heights down to 40 mm WITHOUT stubble
stripes. This is an advantage – especially in countries where a warm
climate allows many cuts. For countries with fewer cuts the Slim Line
cutter bar can be equipped with higher guide shoes.
|
|
Collector - for double swathing
With the collector it is possible to collect swaths from 12 m working
width. Furthermore, you optimize your machine chain as it is not necessary
to rake the material together, which again avoids waste of valuable crop
in situations with very little volume, for example during autumn cut.
|
規格參數 :
GXT 12005 SM + GXF 3205 |
GXT 12005 SM Collector+ GXF 3205 |
|
工作寬度 |
11,55 m |
11,55 m |
所需馬力 |
103 kW/140 HP |
129 kW/175 HP |
刀盤數 |
32 |
32 |
刀片數 |
64 |
64 |
圓盤式 |
Quick'n Safe |
Quick'n Safe |
道路行走寬度 |
3.0 m |
3.0 m |
機器高度 |
2.2 m |
2.2 m |
機器重量 |
5400 kg + 1000 kg |
6900 kg + 1000 kg |
燈光設備 |
Standard |
Standard |
如需詳細規格請洽本公司索取
瑋洲企業有限公司 |
Weizhou International Co., Ltd | |
地址: 80647台灣高雄市前鎮區武德街135巷24號 |
Address : No. 24, Lane 135 Wu-de St., Kaohsiung City 80647, Taiwan ROC | |
信件請寄 : 800高雄市郵政信箱1394號 |
Mailing : P. O. Box 1394 kaohsiung City 800. Taiwan ROC | |
Tel: 07-7169249 Fax: 07-2134620 |
Tel: 886-7-7169249 Fax: 886-7-2134620 |
E-mail : agri-machine@weizhou.com.tw |
E-mail : info@weizhou.com.tw |
E-mail : sales@weizhou.com.tw |
http://www.weizhou.com.tw/Agrimachine/i-discmower/index.htm
請利用即時通訊如下:
QQ : 2728679829 | skype : 886981159003 | Line ; 0981159003 |
Wechat : walterhsu1995 | whatsApp:+886981159003 | Viber : +886981159003 |
Twintter : weizhou | Linked IN : weizhou | TataoTalk : weizhou1995 |
Telegram : +886981159003 | Juiker :+886981159003 |
* 網頁託播如下 :
* 墾丁六福山莊生態園區 | * COZY CASA 格居生活 |