機場草坪割草機
FX 120 / FX 180
Legendary Schulte Toughness,
Economically Priced
1. A single domed 7 gauge continuously welded deck. This makes the cutter extremely easy to clean, prevents water pooling and rusting, helps sheddebris as you cut and weighs less than double decks.
2. 6.5” blade overlap and high blade tip speeds.
3. A four gearbox drive line with independent slip clutches. The FX-180 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4” 20 spline input shafts, 2 3/8” down shafts and are rated at 210hp.
4. An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category
5. The driveline on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance.
All clutches are located under the main shield for ease of service.
Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
Available in 540 or 1000 rpm drive.
特 點
Legendary Toughness, Economically Priced
Single center lock up system
|
Wing lock ups
|
210hp Right Angle GearboxesHeavy duty 1 3/4” input shafts.2 3/8” tapered & splined down shafts
|
260hp heavy duty splitter boxwith 1 3/4” splined shafts
|
FX-180 / FX-120
Schulte Cutters are legendary throughout the mowing industry for being the toughest and most dependable. The FX-180 / FX-120 continues this
renowned tradition at an economical price.
Greaseable hingeline turnbuckles help to reduce wear and aid in long life of the cutter’s parallel lifting mechanism.
FX-180 / FX-120 side skirts are 13 5/8" deep. This additional room under the deck, along with high blade tip speeds, allows for a better cut and
better material flow.
We use extemely strong and durable 517 hubs and spindles with built in metal seal guards on this cutter to tackle any type of terrain.
A one piece center shield allows for easy and full access to drivelines, clutches and gearboxes on the center section.
This cutter has replaceable skid shoes which are made out of 3/8" thick Abrasion Resistant steel.
The center wheel standard is constructed from large 5 9/16" O.D. x 1/4" thick HSS round tubing and the wing wheel standards are made with 4"
O.D. X 1/4" thick HSS round tubing.
Schulte has many hitch options including clevis hitch, an adjustable clevis, precision hitch or solid tongue to help create a better fit & reduce wear
on your tractor's drawbar.
Schulte Industries Super Suction 1/2" x 4” blades leave nothing behind. Schulte blades are strengthened through a hardening process which increases the impact strength of the blade. The blade is chamfered around the blade bolt hole to provide a smooth transition of surfaces around the high stress blade bolt area. The blades are also shot peened to induce beneficial compressive surface stresses over the entire length of the blade. This enhances the durability and extends the fatigue life of the blade. The cutting edge is forged giving it a stronger and tougher edge thereby extending the life of the blade.
|
Schulte Industries exclusive Pentagon Blade Bolt provides maximum anti rotational resistance where the blade is fastened to the stump jumper pans. All pivot points use 1" greaseable pins |
Deck
rings are standard on the FX-180 / FX-120. Deck rings protect the cutter
deck from the blades rising when obstacles are encountered
|
|||
Deck protection rings are standard
|
Heavy duty cast hinge line with wiper seals
|
Greasable adjustable turn buckles for parallel levelling
|
13 5/8” frame depth for maximum material flow
|
Heavy duty drive system for peak performance
|
Metal seal guards on 517 hubs
|
Single levelling rod with floating hitch
|
7 gauge spun formed stump jumper pans
|
FX-180/FX-120 Specifications
SPECIFICATIONS | FX-180 | FX-120 |
Cutting Width | 180” (4.57m) | 126” (3.20m) |
Overall Width |
190” (4.83m) | 137” (3.48m) |
Overall Length | 202” (5.13m) | 202” (5.13m) |
Transport Width | 99” (2.51m) (Outside skid shoe to outside skid shoe) | 93” (2.36m) (Outside skid shoe to outside skid shoe) |
Transport Height | 84" (2.13m) | 84" (2.13m) |
HITCH OPTIONS
Adjustable Clevis | Precision Hitch | Solid Tongue | Clevis Hitch |
Bolt in Axles |
FX-120 |
FX-180 / FX-120 OPTIONS
Center walking axles; Through axles; Aircraft or solid laminate tires or forklift tires; 4, 6 or 8 tire options; Single or double safety chains front and rear; Safety light kit; Standard clevis, Adjustable clevis, Precision hitch (eliminates drawbar wear), or solid tongue; Shredder blade kit
|
Forklift Tires |
Aircraft Tires |
Solid Lamniate Tires |
欲索取目錄或報價請發來你大名 & 傳真及電話 & e-mail
A Division of Ken-Ding Group
瑋洲企業有限公司 |
Weizhou International Co., Ltd |
80647 台灣高雄市前鎮區武德街135巷24號 |
Address : No. 24, Lane 135 Wu-de St., Kaohsiung City, Taiwan ROC 80647 |
信件請寄 : 高雄市郵政信箱1394號 Mailing : P. O. Box 1394 kaohsiung City. Taiwan ROC
Tel : 886-7-7169249 Fax : 886-7-2134620
e-Mail : agri-machine@weizhou.com.tw
http://www.weizhou.com.tw/Agrimachine/Index-mower.htm
回主網站首頁 | 回農業機械首頁 | 回各式割草機 |
請利用即時通訊如下:
QQ : 2728679829 | skype : 886981159003 | Line ; 0981159003 |
Wechat : walterhsu1995 | whatsApp:+886981159003 | Viber : +886981159003 |
Twintter : weizhou | Linked IN : weizhou | TataoTalk : weizhou1995 |
Telegram : +886981159003 | Juiker :+886981159003 |