Mixers - Batch mixer
The modern way to provide accurate weights and thorough mixing of
silage, haylage and all supplement. |
|
|
The Valemtal batch mixers feature a heavy duty
mixing auger with right and left hand flighting to blend the ingredients
in the center, while the carrying chain with sturdy paddles create a
tumble-mix effect for a fast, accurate mix. |
|
-The all steel drive sprockets and carrying chains resist
traction and wear. (Industrial type, mainly used by pulp and paper mills
to move logs).
-Heavy duty mixing auger with right and left hand flighting to insure very
accurate mixes. |
-Floor and auger trough made of 3/16"
stainless steel plate for long rust free life.
-The mixer box has been reinforced at stress points for more
rigidity.
-Heavy scrapers clean silage off the chain and paddles.
-Full-width paddles eliminate dead spots and totally empty the
mixer. |
|
|
|
-A convenient door opening system allows the operator to easily regulate
the proper feed discharge rate and avoid overloading the conveying or
feeding equipment.
-An optional electric door opener is available, allowing remote operation. |
Heavy duty magnet
A large powerful magnet protects livestock from hardware desease.
It draws out tramp metal, which may become accidently mixed with
material entering the mixer. Flat magnet fits into the bottom of
discharge chute. (Optional). |
|
|
These
simplified diagrams show the operation of the Valmetal Batch Mixers.
|
|
The heavy-duty carrying chain with sturdy paddles keeps the whole
batch moving to create a tumble-mix effect, as the feed from the
bottom is raised to the big mixing auger, where the ingredients,
from the right and the left, blend under pressure in the middle at
the rate of 1000 lb/min. for a fast accurate mix. |
|
|
When the operation, the full-width paddles are pulled under the
feed, initialing a tumble effect and pulling the ration to the
front where ingredients are cross blended and pushed upward. The
shaded area shows the space that feed occupies when mixing the
recommended volume. |
|
S
p é c i f i c a t i o n s
|
Model
|
BM-140
|
BM-170
|
BM-200
|
BM-140
|
BM-240
|
BM-300
|
BM-400
|
Bushnel
mix capacity
|
112
|
136
|
160
|
192
|
240
|
280
|
320
|
Width
|
60"
|
60"
|
72"
|
84"
|
84"
|
84"
|
84"
|
Height
with scale
|
84"
|
84"
|
84"
|
84"
|
104"
|
104"
|
104"
|
Length
|
108"
|
120"
|
120"
|
120"
|
138"
|
150"
|
162"
|
Discharge
height
|
22"
|
22"
|
22"
|
22"
|
30"
|
30"
|
30"
|
Motor
|
5
H.P.
|
5
H.P.
|
5
H.P.
|
7½
H.P.
|
7½
H.P.
|
10
H.P.
|
10
H.P.
|
|
|