手指型(轉輪)集草機
MAGNUM
The Magnum Pull-Type Rake is the biggest model of the V-Rake Pull-Type
line.
These machines are designed to obtain a maximum working width of 36' and
windrows with variable width from 3' to 6'.
Couplings of all various frame components are flexible to obtain the maximum.
adjustment of the machine on very rough and uneven grounds.
Moreover: the drawbar and the opening system are mounted over the wheels, this
allows to make a windrow without hindrances with the components of the machine.
All rake wheels are spring-load lifted independently and this allows the machine
to follow the ground contours.
Tines are made of special steel with 7 mm 0 diameter. Tines pick up the hay
making fluffy windrows very suitable for baling.
A double hydraulic system, tractor driven, controls both the wheels lift and
machine total or partial opening and closing.
On the hydraulic cylinder, which controls the opening and closing of the
machine, is mounted a locking valve to maintain the required working width. Even
in case of pipe breaking the machine remains in the same position which has been
set.
Our Magnum line hay rakes rake up the crop quickly and gently, enabling better
drying of the hay and an excellent yield.
Elegantly designed, they a re made of quality steel using advanced production
processes, and are fitted with excellent components that make them highly
productive, reliable and lasting machines.
They have rake wheels with a diameter of 55" (1.4 m), each wheel is
equipped with 40 tines made of top quality spring steel. The tines are uniformly
spaced and designed to collect all the product, forming a perfectly shaped
swathe. The tines can be replaced individually, so as to waste as little time as
possible.
The hay rakes of the Magnum range are designed in such a way that adjustments
are simple to accomplish. A lever acting on a sprocket equipped with a locking
mechanism enables the width of the swathe to be adjusted easily and rapidly from
about 3' (0.91 m) to about 6' (1.8 m). The machine can also be equipped with an
optional hydraulic device enabling adjustment of the swathe directly from the
tractor. Each rake wheel has its own spring enabling the correct pressure on the
ground to be obtained separately, optimizing the quality and quantity of the
crop. What is more, after this initial adjustment, all the subsequent
adjustments are made on the whole wing of the hay rake thanks to a crank
operating a shaft to which all the hay rake wheels are connected. This saves a
lot of time.
For transport, adjustable disk brakes stabilize each of the pivoting wheels,
enabling the machine to proceed in the utmost safety with no shimmying during
transport.
The wide range of machines in the Magnum line covers working widths from about
21'4" (about 6.5 m) for the machines with 10 rake wheels up to about 31'
(about 9.4 m) for those with 16 rake wheels.
Hay rakes need to be solid and tough to adapt to the extreme conditions found in
the fields. This means that in addition to all the features already described
above, all the wings and the drawbar of these extremely large machines have been
fitted with extra reinforcements, making them fully reliable in time in spite of
the amount of work they are made to do. In spite of their large size, however,
they are easy to handle and flexible, and they can be changed rapidly from the
working position to the transport position from the control cab, thanks to a
hydraulic system that withdraws the strong cylinders in which the wings end and
those that lift the rake wheels. Just like the smaller versions, they are easily
parked thanks to the height-adjustable supporting foot. All the optional kits
can be mounted on them, including the rear tandem wheels enabling them to pass
safely over rough ground, the single side opening kit, enabling damp swathes to
be overturned, the central kicker wheels kit,
enabling the hay to be moved also in the central area, not reached by the
lateral rakes, and so on. There is also an adjustable coupling for connection to
the tractor, easily adjusted to match the height of the towing hooks of
different tractors.
Each rake wheel has an adjustment spring. When the spring is suitably stretched,
it ensures that the pressure of the associated rake wheel against the ground is
just right, to make sure of excellent raking on any terrain. After this initial
adjustment of the individual rake wheels, it is possible to make all the
subsequent adjustments effective on the whole wing of the hay rake thanks to a
crank, that operates a shaft, to which all the rake wheels are connected, saving
a lot of time.
OPTIONALS
Single side opening kit
A valve, simple to fit and to handle, can be set so as to choose only one of the
wings of the hay rake, the one on the right or on the left, as required, without
having to install or remove any parts on the machine. The kit is extremely
simple to use, and enables easy overturning of damp swathes or those that have
not dried out completely, so as to speed up the drying process.
Kicker wheels kit
This kit consists of two rake wheels positioned alonq the drawbar, and is
activated by a hydraulic cylinder connected to tne hydraulic line controlling
the lateral rake-wheel lifting cylinders. It enables the hay to be removed also
in the central area, not reached by the lateral wheels. This is important not
only for the quality of the swathe but also for making it easier for the baling
machines to collect the hay, since otherwise they would not be able to pick up
the part that has not been removed.
Hydraulic rear-opening kit
Tnis kit enables the length of the swathe to be adjusted from about 3' (0.91 m)
to about 6' (1.8 m) directly from the tractor. This is especially useful both
for adapting work rapidly to the different quantities of forage present in the
field and to adapt to the different working widths of the baling machines. It is
easy to install even on machines with mechanical levers since it uses the same
coupling points.
Rear tandem wheel kit
This kit enables the machine to pass safely over rough terrain. A strong
oscillating support adapts perfectly to the various different conditions of the
terrain. There are two wheels on each side, at a suitable distance from one
another, so that one of the pair is always resting on the highest part of the
ground, even when there are furrows or holes, allowing the machine to move
smoothly.
Wind shielding kits
These plastic flanges applied to the rake wheels allow the hay to slide more
smoothly better, so as to create properly shaped swathes.
機 型 | MK10 | MK12 | MK14 | MK16 | MK18 | MK20 |
所需工作馬力 | 22,4 Kw 30 HP | 30 Kw 40 Hp | 40 Kw 55 HP | |||
轉輪數 | 10 | 12 | 14 | 16 | 18 | 20 |
手指叉術 / 每轉輪 | 40 | |||||
工作速度 | 22,5 Km/h | |||||
道路行走寬度 | 2,5 m | |||||
輪胎規格 | 205-75/15 | |||||
機器重量 | 1475 Kg | 1600 Kg | 2285 Kg | 2445 Kg | 2365 Kg | 2515 Kg |
工作寬度 | 6,5 m | 7,6 m | 8,7 m | 9,4 m | 10,2 m | 11 m |
瑋洲企業有限公司
81362 台灣高雄市前鎮區武德街135巷24號 信件請寄: 高雄市郵政信箱1394號
Tel : ( 07 ) 7169249 Fax : (07) 2134620
e-mail : agri-machine@weizhou.com.tw
http://www.weizhou.com.tw/Agrimachine/fingerake/index-i.htm
回本網站首業 | 回農機首業 | 回手指型(轉輪)集草機首頁 |
MSN : steveLee73@hotmail.com | skype : service450429 | QQ : 1467808036 |